Composite Cases
Technology benefits
1.
Low weight
Products from this fiberglass are lighter than analogues from metal
2.
Low cost of maintenance
Products do not require additional machining, may be made in different colors, can be provided with additives of pigments and produced in large production batches.
3.
Durability
Products are chemically-, UV-, Frost- resistant and fire resistant.
4.
Design
Products have a smooth, shiny surface. It is possible to combine various structural elements in a single block.
5.
Import substitution
Composite Boxes are being manufactured in Russian Federation, by using local raw material.
6.
Safety
Our products meet all safety requirements
Product benefits
Service life over 30 years
Vandal proof design
Does not rust, does not need painting
Absolute protection against acids and alkalis
No grounding required
Fire resistance: G1, G2, G3, B0
Full dielectric
Enclosure rating: IP 54-67/ЕХ
Operating temperature range from -60 ° to + 80 °
Radiotransparent
Highly resistant to extreme weather conditions
Polyester sheet press
Polyester sheet press material (prepreg) in the form of a sheet, which is covered by two sides of a special barrier film, which consists of unsaturated polyester substances, fillers, additives and fiberglass. Used in the manufacture of products for which basic mechanical properties and high surface quality are used.
The maximum econom
-
The maximum economic benefit when using enclosures made of SMC materials is extracted by enterprises whose energy infrastructure facilities are located on the street. It is there that the hulls are affected by the most adverse external factors that reduce their service life.
-
An important advantage of composite SMC materials is the ability to complete / partition with additional horizontal shelves and vertical partitions to ensure safe access to the devices for control and maintenance.
-
The thick walls of composite SMC material in combination with a reinforced door locking mechanism at three points prevent unauthorized penetration of electrical panels.
-
Introducing composite SMC materials instead of obsolete metal enclosures to protect electrical panels, you can significantly reduce the cost of ongoing maintenance and repairs, increase the service life of the enclosure and reliably protect your equipment from external factors.
Values of innovation
Values of innovation
| Characteristics | Steel | SMC-material |
| Easy installation | No | Yes |
| Corrosion resistant | No | Yes |
| Resistance to fuels and lubricants, acids, salts | Low | High |
| Self-extinguishing | No | Yes |
| Operating temperature from -60C to +80C | Yes | Yes |
| Frost formation | Yes | No |
| Low specific gravity | Yes | Yes |
| Form strength | High | High |
| Color resistant to UV | Yes | Yes |
| Radiotransparency | No | Yes |
| Completely dielectric | No | Yes |
| IP rating IP54 | Yes | Yes |
| IP rating IK10 | No | Yes |
| Service life without maintenance (years) | 3 | 30+ |
In the Russian Feder
- In the Russian Federation, most of the outdoor electrical wiring boards are made in metal cases.
- The main disadvantage of such cases is corrosion, and therefore they need to be annually covered with a protective layer of paint.
- Frequent adverse weather conditions in Russia only exacerbate the situation and dramatically reduce service life.
- Depending on climatic conditions, this period is, on average, 5 years. The degree of dust-moisture protection of metal IP enclosures, initially declared by the manufacturer, often decreases with time due to desiccation and chipping of the gum seals.
- These factors adversely affect the state of equipment installed in such housings, which are often expensive, and contribute to its speedy failure.
- Less than half a century ago, composite SMC materials were developed in Europe. This development has a number of advantages compared with its metal counterparts from steel and aluminum.
Максимальная экономическая выгода при использовании корпусов, изготовленных из SMC материалов, извлекается предприятиями, чьи объекты энергетической инфраструктуры находятся на улице. Именно там на корпусы воздействуют наиболее неблагоприятные внешние факторы, уменьшающие их срок службы.
Сертификаты качества продукции
Важным преимуществом корпусов из композитных SMC материалов является возможность комплектации/секционирования дополнительными го- ризонтальными полками и вертикальными перегородками для обеспечения безопасного доступа к аппаратам с целью контроля и обслуживания.
Награды
Толстые стенки из композитного SMC материала в сочетании с усиленным механизмом запирания дверцы в трех точках позволяют предотвратить несанкционированные проникновения в электрические щиты.
